Sliding patio door repair service Doors Repairs

Your sliding patio doors will bring in natural light to your home and increase its energy efficiency. As time passes, they could start to show signs that require some attention.

The majority of problems with sliding local patio door repairs patio door repairs (this website) doors are relatively easy to fix. Find out how you can keep your sliding patio doors looking like new.

Tracks that are dirty or damaged

The tracks of your sliding patio door might be filthy or blocked. Over time, the grit and grime of everyday use build up on the track and can cause the door to become jammed or even fall apart completely.

A regular cleaning of sliding doors and their tracks as part of your household chores can help minimize this build-up. Start by cleaning large debris off the tracks. Then apply warm water and non-abrasive cleansing products like dish soap to clean them. Vinegar can be added to your cleaning solution to get rid of stubborn grease and dirt stains.

If your sliding door still not moving smoothly after you have followed these steps, this could be a sign that there is more damage. This may require a professional to fix or replace the door. There are a few simple solutions you can try before calling in professionals to avoid costly repairs or replacements.

Place a doormat under your sliding doors. This will help keep dirt out of the tracks. Also, you should cut back any bushes or plants near your sliding doors to minimize the amount of debris that gets tracked into the tracks. Close the door in a timely manner to avoid damaging the rollers and wheels. By keeping your doors clean and lubricated, you can extend their lifespan substantially.

Rollers that are misaligned

Sometimes, a sliding patio door becomes out of alignment or becomes stuck. This usually happens due to dirt, or other obstructions that can be easily removed. But sometimes it can be due to bent tracks or rollers. In this case you can re-align the rollers by removing them by using the adjustment screws, and then cleaning with ruby alcohol. Be cautious because these parts are fragile.

If your doors are still stuck then you could try using lubricants on the rollers to reduce friction and make it easier for them to slide. Use a silicone-based product, as petroleum-based lubricants can attract dirt faster. It is important to clean the rollers and tracks before lubricating.

After cleaning the rollers you can reinstall using their adjustment screws. Make use of the same lubricant you used to clean them. When reinstalling the rollers, ensure that you push them completely into their channels. You can now test your door and see if it slides smoothly.

If the issue persists, it may be necessary to remove the door and inspect the rollers and tracks. If the rollers or tracks are badly bent, they may need to be replaced. It's best to hire an expert to install the rollers or tracks in this scenario.

Warped Glass

Sliding glass doors are ideal to bring in natural light and the outdoors into a space, but they can also be vulnerable to damage that requires repair or replacement. Cracks, warping and fading are a few of the most frequent issues. The materials used to make the sliding glass patio doors start to degrade when exposed to sunlight, heat and other environmental elements. The most common cause of cracking is impacts, such as a lawnmower or ball smacking into the door. Fading usually occurs due to repeated exposure to sunlight as well as other elements.

If your sliding patio doors aren't easy to close or open, it could be an indication that their rollers and tracks are not functioning correctly. This issue may result from the accumulation of dirt, rust, or debris in the track, misaligned wheels or a lack of lubrication. This issue can be fixed by regularly cleaning the tracks, rollers and clearing obstructions.

The locking mechanism may also be faulty, making it difficult to open or close your sliding patio doors. This could be due to the alignment of the track or wear and tear, however, a simple fix is to adjust the locking mechanism by turning the adjustment screws hidden in the bottom of the track.

Drafts or air leaks around your sliding patio door are a frequent issue that can affect the efficiency of your home's energy usage. They are usually caused by damaged weather stripping or poor alignment of the doors that is easily fixed by replacing the old weather stripping and realigning the doors.

Loose Handle

It can be quite frustrating when the handle of a sliding door becomes loose. It becomes difficult to open. This issue is usually caused by an improperly aligned locking mechanism, which can be fixed by loosening the screws that hold it in place and then tightening them until they are snug against the jamb of the door.

Another reason that is commonly cited for a loose handle is that it has become detached from the spindle that connects the interior and exterior handles. This is typically the result of a variety of factors, such as excessive use or wear and tear or simply the general aging. If the issue isn't dealt with promptly, the handle could be loosened and fall off.

To fix this problem it is necessary to find the screws that connect the handles' exterior and interior. They are usually hidden by tabs made of plastic that can be removed using a flathead screwdriver (or in the case of certain handle styles, a Phillips-head screwdriver). It is a good idea to keep these screws safe so that you don't loose them.

After removing the old handles then the next step would be to take off the spindle. This can be accomplished by tapping the end with a hammer or mallet until it falls free from its place within the door. The new handle can be put in place by simply putting the spindle through the hole on the interior handle, and then placing the other end of the spindle into the hole on the exterior handle. After the handle is installed, tighten it by screwing back the screws and then test to ensure the lock and unlock mechanism is working correctly.

Weatherstripping that isn't working properly

A damaged or cracked weatherstripping could allow water and air to get through your patio doors, compromising the comfort and energy efficiency of your home. It could let in moisture and create drafts, which will increase your cooling and heating costs. It's easy to replace faulty weatherstripping without professional assistance. You can take off the old weatherstripping by either loosing the staples using a screwdriver, or gently squeezing it with a putty knife and pulling it away from the door. Then, you can clean the area and apply a layer of weatherstripping which is secured with a foam seal. This will prevent leaks and improve the comfort.

If your sliding patio doors are no operating as they should, it's crucial to take action immediately to prevent further damage and to keep them functional for years to come. Depending on the degree of the issue, DIY or professional repair/replacement may be the best solution.

The most common issues that are encountered with sliding patio doors are dirty rollers due to debris in the tracks, misaligned wheels and a loose handle. In most instances these issues can be resolved with regular maintenance and cleaning, which includes oiling the track and rollers, as well as adjusting them and tightening hardware. However, if these methods aren't working, it's best consult a professional for advice to make sure that your patio door is functioning just as it should. Make sure to check the warranty information prior to you decide to replace or repair your patio door. This will save you money in the future on repairs and replacements.