Repairs to uPVC Windows

uPVC is a great option for modern homes. They are easy to maintain and are durable and long-lasting. They do not decay or rust as aluminum and timber.

It is essential to clean and oil upvc window repairs windows and doors on a regular basis. This will help prevent unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home and may even be fatal. You should take the time to ensure that your windows are in good condition.

Single-pane windows are relatively easy to replace, and they generally fit into frames that were previously in use very easily. If windows with double panes are held together by internal beading, it will be harder to remove and replace the old panes. In this situation you'll need find some plastic spacers that assist the new pane to fit perfectly into the frame of the window.

Wearing eye protection and thick gloves is essential when you are planning to remove the glass yourself. You should also lay down a dropcloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not onto the floor which could cause them to be trampled.

After the glass has been removed from the window, it's best to seal the gap with packaging tape or duct tape to stop water and drafts from getting into the property until a professional can come out and repair the window. It also acts as a barrier that will prevent any intruders to gain access into your home. If the gap between the door and the window is substantial, you may prefer an alarm system that has an opening. This will give you the best of both.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash window. However, with time, they may be afflicted by a variety of issues like sliding. A window that is sagging can cause problems with light, draughts, and even security. If you notice that your upvc window repair window is beginning to lose its shape, it's important to act quickly to prevent the problem from worsening.

To fix a window that is sagging you can try to reposition the hinges. First, you'll need to open the windows to get at the frame. Then, remove both the hinges at the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. Close your window to test the fit after you've repositioned your hinges. If you're satisfied with the fit of your window, you can tighten screws to keep them in the right position.

If you aren't able to move the hinges, you might require replacing the seal. Over time rubber seals can lose their elasticity and dry out and cause their tightness to decrease. If this happens, it's essential to replace the seal as soon as possible to ensure your uPVC windows are watertight and safe from drafts.

uPVC handles may also loosen. Often, this is caused by screws that have come loose over time. However, it could also happen because the handle mechanism has worn out. Fortunately, it's easy to fix the loose uPVC window handle yourself. First, you'll need to close the window and perform an experiment fitting. The corner joints of the sash need to be aligned with the casing joint. If it doesn't, you can use the screwdriver to loosen up the handle. Then, turn the mechanism back into place.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains, it is important that you take action. The leaks of water from windows do not only lead to the degradation of your home's structure but also hinder your efforts to control the temperature within your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or is missing.

This is an easy fix that can be done by any DIYer who has the ability. Depending on the severity of the issue is, old caulking may have to be removed. When it comes to uPVC repair, you should be careful not to over-caulk. This will only make your window repair more difficult to clean and decrease its energy efficiency.

It is important to check that the drainage holes are free of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more severe cases, you may need to replace the window.

Mold spots and rotten sills are also signs of water leakage. The mold thrives in damp environments and can quickly spread throughout the house.

It is also important to note that if the leakage originates from the glass of your double-glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sagging. It is also possible to be repaired by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open or if it blows open with a breeze. Anyone with the skills to fix them can replace hinges in just a few minutes.

Like all mechanical parts hinges will be damaged over time. The process of replacing a hinge on a window is an easy process but it can be easier to do if you have someone to help you hold the frame up.

Make sure that the uPVC hinges are closed and open in the right direction. You can do this by looking for the arrow on each hinge, this indicates the direction in which the window should be opened.

The issue could be caused by opening the window improperly or a faulty installation in the factory. Sending us a photo via our website will often solve the issue. We are more than happy to offer assistance.

It is also essential to lubricate the hinges on a regular basis. This can be accomplished by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window to open and close more easily. It can also prevent corrosion and reduce the possibility of sticking. This must be done at a minimum every year. WD40 or other solvent-based oils are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by several different causes. The hinges can also become misaligned due to wear, which can cause gaps between the frame and sash. If they are beyond repair, it may be necessary to have them realigned. Second, the interlock can also become disaligned. This happens on the hinge side and may need to be cleaned. In some instances it might be necessary to replace them.

The second most frequent reason for draughts are the window seals. They can become worn down or damaged over time, and allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass, which will help regulate indoor temperatures, and also reduce the possibility of draughts.

Another method of reducing the amount of draughts is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler, which can be hung over your window sill. They will keep your home warm by blocking out cold air.

With a bit of regular maintenance and repairs windows made of upvc will provide an excellent level of security and insulation for your home. However, it is important to recognise that all windows have a life span and they may reach the point when it's more economical to replace them than fix them. If you encounter any issues with your upvc window you should consult an expert immediately.