Repairs to uPVC Windows

uPVC is a great option for modern homes. They are long-lasting, durable and easy to maintain. They do not decay or rust as timber and aluminum.

It is important to clean and oil UPVC doors and windows regularly. This will help prevent costly repairs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge deal of damage to your home, making it extremely dangerous and possibly fatal. You should take the time to make sure that your windows are in good shape.

For single pane windows it is relatively easy to replace them, and the new window is usually able to fit into the old frame very easily. However when you have double pane windows that are held in place by internal beading, it'll be more difficult to get rid of the existing panes and install new ones. In this case you'll need find some plastic spacers that help the new pane to fit perfectly into the frame of the window.

Wearing protective eyewear and thick gloves is essential for anyone who plans to remove the glass yourself. You should also lay down a dropcloth before you begin working on the window panes so that any shards fall on the fabric and not on the floor, where they could be trampled under.

It's a great idea cover the gap with tape after the glass has been removed. This will stop drafts and water from entering your property until a professional is able to fix the window. This will also act as a barrier that will prevent any intruders to gain access into your home. If the gap between the window and the door is large, you might want to use security screens that has an opening. This will provide the best of both.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash windows. In time, they could develop a number of problems such as sagging. A sagging window in upvc window repairs near me could cause issues with light, draughts, and even security. If you notice that your upvc window repair near me window is beginning to sag it's important to act quickly to stop the issue from worsening.

Repositioning the hinges can aid in fixing a window that is sagging. First, you'll need to unblock the windows to access the frame. Then, using a screwdriver, you can unscrew the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you have relocated your hinges. If you're happy with the fit, you can tighten the screws to ensure that they remain in the right place.

If you aren't able to move the hinges you may need to replace the seal. Rubber seals may dry out and lose their elasticity with time, causing them to lose their tightness. If this happens, it's essential to replace the seal as quickly as you can to ensure that your uPVC windows are watertight and secure from draughts.

uPVC handles can also loosen up. This is usually due to screws that have loosened over time, but it could also be caused by the handle mechanism wearing out. It's fairly simple to fix a loose uPVC handle. You'll first need to close the window and then perform an initial fitting. The joint at the corners of the sash should align with the joint on the casing. If it doesn't then you can use a screwdriver or a wrench to loosen the handle, and then reverse the mechanism back into the position it was in.

3. Water Leaks

It is essential to act if you get up each morning to find mouldy walls and floors that are wet. The leaks of water through windows could cause structural damage to your home and affect your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a fairly simple fix that can be completed by any skilled DIYer. Depending on the severity of the problem the caulking used previously may need to be removed before a fresh layer is applied. It is crucial to remember that when it is about uPVC window repairs you should not be tempted to 'over-caulk in order to make the area more difficult to clean and could reduce the efficiency of your energy.

Check that any drainage holes do not have debris in them and ensure that the sill pan has been properly angled to drain away from the window. In more serious cases you might have to consider replacing the window.

Other indicators of water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. This is a fungus that thrives in damp conditions and can quickly spread throughout the home.

If the leakage is occurring between the double glazed window repairs near me-glazed glass it is more likely the issue is more related to the seal, not the frame. This can be easily repaired by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open or if it opens with a breeze. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Like all mechanical parts hinges are prone to wear out over time. Changing a window hinge is essentially a simple procedure, but it is easier with someone else to help you hold the frame up.

Make sure that the uPVC hinges are closed and open in the proper direction. This can be done by looking for the arrows on each hinge. This indicates which way the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a certain way or due to inadequate installation at the factory. Sending us photos via our website will often resolve the problem. We are more than happy to give assistance.

Regular lubrication of the hinges is also necessary. This can be done by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It can also stop corrosion and reduce the possibility of sticking. Ideally, you should do this at least once a year. WD40 and other solvent based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by different things. First, the hinges because of wear and tear, can become misaligned, this causes a gap to form where the sash joins the frame. If they're beyond repair, it might be required to realign them. The interlock, which is located on the hinge of the window and can also become misaligned, again it is feasible to give them a thorough clean, however in some instances it could be necessary to get them replaced.

The seals may wear out or be damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glass. This will help regulate indoor temperatures and lessen draughts.

Another, and most effective ways to reduce draughts is by using a draught excluder. These are typically fabric tubes filled with some sort of filler and can be placed on the top of your windowsill. These will help to keep cold air out and keep your home warm and cozy!

Your upvc windows can keep providing excellent insulation and security to your home with a little regular maintenance and repairs. It is essential to remember that all windows will eventually become worn out, and it may be more cost-effective to simply replace them instead of fixing them. So, if you are having issues with your upvc windows, it is always recommended to seek help from a professional immediately.