Sash Lock Door Handles

If you're looking to increase the security of your home without sacrificing aesthetics choose sash secondary glazing lock door handles. They can be used with a mortice latch or sash lock. They can be combined with a night latch to provide additional security for doors that are internal.

The handles are made up of a lever/handle on a backplate and are generally used with a three or five lever mortice lock. They can also be combined with tubular latches.

Lever Lock Handles

There are a variety of lever door handles available to match any home decor. The rustic lever latches go well with a ranch or farmhouse style decor and are also well-liked in modern homes. Classic lever handles can be round or spherical, and are simple to grasp. They are easy to use, inexpensive and can be used with any type of home design. For an elegant look, opt for polished chrome or a satin nickel handle. These finishes are easy to clean and durable. Antique bronze and polished Brass are also options. A lot of handles feature a decorative design, such as tiny amber worm eyes or long-horned crystals. Some have the shape of a pin or star that is molded into the top of the lever.

To replace the lever lock door handles you need to have the correct screwdriver, or tool to remove them. Based on the model and design you may need to use an awl or nail to remove the lever handle. Some lever handles feature an oblique notch or hole at the bottom of the handle that can be used to pull them open.

Follow the manufacturer's guidelines for removing your handles once you have the correct tool. Check the spindle of the new lever. Doors that are morticed (cut into the door) for previous latches or locks, and need to be fitted to a certain spindle size. The majority of lever handle manufacturers use a standard door handle spindle.

If you want to replace a sash-lock door handle, remove the handle that was previously used and disconnect the tubular latch bolt from the strike plate on the door frame. You will then need to drill a hole in the door frame, then insert the latch bolt through, and connect it to the strike plate within the door frame.

When installing a new lever door handle, it is essential to know that all ADA (Americans with Disabilities Act) compliant handles are designed to be operated with a hand and should not require the user to tightly grip or turn their wrists. To be in compliance with ADA compliance standards, the lever door handle must not be operated using only fingers and thumbs, or even the entire hand.

Sash Lock Handles

The primary purpose of sash locks is to seal the door by pulling the moving sashes tightly together. This helps to keep the interior temperature of the house and stops drafts. They are also great for doors that don't require the security of a keyed locking system.

Sash locks are often referred to as mortice sashlocks and combine a dead bolt and latch into a case that is fitted in the material of a door. They are often used in conjunction with a set of door handles and are available in a variety of options.

The lever lock handle is operated by a lever that has an opening cut into the backplate below. This allows a key to be inserted into the mortice sash to operate it. It is typically used for doors that don't lock like dining rooms and living rooms, but can be paired with a tubular latch on an internal door that is more secure.

These are designed to hold the sash in place at various points, and have a hook that fits inside the keeper. They come in a variety of styles and designs that are suitable for different types of windows like hinged or sliding casement windows. Some are made from cast aluminium, whereas others are made are made from brass or even iron wrought. They are available in a variety of finishes that match other components of your door furniture, for instance, escutcheons that protect the keyhole.

3 lever sash lock handles are suitable for internal doors but not for external doors, because they lack the security level required by insurance providers. They are also less resistant to forced entry than their five lever equivalents, making them more vulnerable.

A door sash lock featuring 5 levers is a much better option for external doors because it offers higher levels of protection against forced entry and is much more difficult to bypass or pick. The locks are a revolutionary design that has been tested and approved to meet the strict building, fire and disability regulations.

The first step to replacing Window Sashes the handle on a sash lock is to remove the old fastener by taking the screws from both ends. Be sure to have a screwdriver on hand and separate the parts carefully to avoid damaging them. Use a pencil to mark where the screw holes are, so you can place the new sash windows fastener correctly when you are putting it on. Clean any paint or dust flecks, then screw into the new fastener. Test the handle to ensure it works correctly and creates an airtight seal.

Tubular Latch Handles

The tubular latch is a latch mechanism that sits inside a door and can be operated by turning your handle. It is designed to latch a door shut but does not secure it like mortice locks. These are most often used on doors that are internal and no locking is required. They can be fitted either with knob or lever handles.

There are a variety of sizes of tubular latches available. The sizes range from the economy to the high-end architectural. The size of the door depends on its use and whether it is equipped with an lock. For instance, a bathroom door may need to have the ability to turn a thumbturn and release in the event of emergency, so you will need an latch that can be locked.

The backset of your door will determine the latch you select. This is the distance between the edge of your door and the center of the hole that is used for the door handle knob or rose, and you will need to select a latch with the same backset measurement. This will ensure that your door knobs or handles operate the latch smoothly.

If you are installing a lever or knob that has a spring or not spring, it's important that you select a tubular latch that is heavy-duty. It must have an elongated follower that is double-sprung. This will ensure a smooth latch operation and stop it from becoming slow or unresponsive after prolonged use.

Once you've selected the correct latch for your requirements, the next step is to fit it on the door. The first step is to make sure that the latch is aligned to the top of the door frame or casing. Then mark the location of the latch and drill holes. Countersink drill bits can aid in creating the right recess to allow it to fit comfortably.

Once the latch is installed, you can screw it onto the door. It is essential to verify that it's functioning correctly before putting in your door handles and putting in the locks, so make sure to test it by closing and opening the door repeatedly. If it's not functioning correctly, try lubricating the door with WD40 and re-trying it. If you are still experiencing problems, it may be necessary to contact an expert locksmith or installer.

Keyhole Handles

The keyhole handles are used with a tubular lock installed in the door. The latch is used to open and shut the door. The handle is able to engage the latch when it is pushed down and then releases it when pulled up. These handles are usually used on interior doors like those found in living rooms and dining rooms. However they can also be fitted to the front door, if they are paired with the nightlatch.

Door knobs are more contemporary handles that include a sprung lever/handle with a square or round fixing stem, and a matching thumb-turn or escutcheon. They come in a variety of styles and finishes to match the doors in your home. They can be used in conjunction with Euro cylinder locks or multipoint locking systems to provide extra security to your door. This is accomplished by putting several points of locking along the door height. It is also necessary to have compatible door handles with the right lock centre dimensions to fit the barrel of the cylinder.

A keyhole escutcheon is an escutcheon that covers the door's key hole to conceal it from view and give an elegant appearance to the handle. They come in both a pop on or screw on design and are available in various finishes to match the door handle. Additionally, a concealed escutcheon is able to be attached to the edge of the door to conceal the keyhole and give it a more modern look.

Certain handles are compatible with Euro-cylinder locks. These are used to secure uPVC door and require handles that have a Euro cylinder hole as well as screw holes in the backplate. These handles could also require a Euro-cylinder escutcheon or a standard escutcheon depending on the purpose for which they are used.

Whether you choose mortice lock or a sash lock, or a tubular latch for your door, you need to understand the different features of each and the requirements they have to work with other components of your uPVC door system. You'll need to consider the thickness of your door and door hinges, as well as frame reinforcements as well as the backplate of the door handle size, lock centre dimensions and the screw centres for the cylinder.